Does FSSC 22000 require calibration?

Yes. FSSC additional requirement 2.5.9(b) calls for a program to calibrate and verify equipment used for quality and quantity control, and ISO 22000:2018 clause 8.7 covers the control of monitoring and measuring. FSSC states that the calibration program has to meet clause 8.7.

What equipment does FSSC 22000 expect to be calibrated?

FSSC's interpretation of additional requirement 2.5.9 gives examples such as measuring scales, pH meters, refractometers, consistometers, viscosity meters, vernier calipers, online level inspectors and graduated cylinders. Equipment that monitors a critical control point or an operational prerequisite program falls under the hazard control plan in ISO 22000 clause 8.5.4.

What changes for calibration in FSSC 22000 Version 7?

The calibration program wording in additional requirement 2.5.9(b) reads the same in Version 7 as in Version 6. Version 7 was published in May 2026 and brings in the 2025 ISO 22002-x prerequisite programs, and upgrade audits run from May 1, 2027 to April 30, 2028.

Does a laboratory doing FSSC 22000 testing need ISO/IEC 17025 accreditation?

Not necessarily. FSSC's interpretation of additional requirement 2.5.1(a) says the laboratory does not have to be accredited but must work to the applicable requirements of ISO/IEC 17025 when it analyzes parameters critical to food safety. A laboratory accredited for the specific test methods meets the requirement.

Can Axiospec hold FSSC 22000 calibration records?

Yes. Axiospec records each calibration with the readings, the reference standard and who did the work in a tamper-evident ledger, and exports an audit pack. It does not replace your hazard control plan or your monitoring logs, and certification is decided by your certification body.

Can a small food plant use Axiospec?

Yes. The free plan covers up to 50 active instruments with unlimited users, and a new workspace starts with 45 days on Professional for up to 1,500 active instruments. We load existing records for you at no charge on every plan.

Does Axiospec force technicians to fill in every required field?

Yes, by default. When you select a standard, the fields that standard requires are marked on the calibration form and the save is blocked until they are filled. Enforcement is on for every workspace unless an admin turns it off in Settings. There is one deliberate exception. A brand new workspace is not held to the standard fields until it has logged its first calibration, so a first run is never trapped behind a form it cannot save. Full strictness applies from the second calibration onward. The public REST API enforces the same requirements on write.

For food & beverage manufacturers

FSSC 22000 calibration requirements under ISO 22000 clause 8.7

FSSC 22000 is a food safety management certification scheme built on ISO 22000:2018, and its calibration obligations come from two places: clause 8.7 of ISO 22000, Control of monitoring and measuring, and FSSC additional requirement 2.5.9, which asks for a program to calibrate and verify equipment used for quality and quantity control. The checklist below shows where calibration sits in the scheme as of Version 7, published in May 2026. Axiospec keeps that measuring equipment tracked, current, and documented, so the measurements behind your food safety decisions rest on instruments you can stand behind.

Create your account

FSSC 22000 calibration requirements checklist

ISO 22000:2018 clause 8.7: Monitoring and measuring

This is the ISO 22000 clause that sets requirements for the control of monitoring and measuring. FSSC states that the calibration and verification program has to meet it, and its audit report template has the auditor describe the processes in place for this control.

FSSC 2.5.9(b): Calibration program

Quantity control procedures for unit, weight and volume must include a program to calibrate and verify the equipment used for quality and quantity control. FSSC's interpretation article also expects documented evidence of the quantity control checks, and it names scales, pH meters, refractometers, viscosity meters, calipers and graduated cylinders as examples.

ISO 22000:2018 clause 8.5.4: Hazard control plan

The hazard control plan covers monitoring at critical control points (CCPs) and for operational prerequisite programs (OPRPs). FSSC auditors verify each CCP and OPRP during the audit, and they still verify the records when a line is not running.

FSSC 2.5.1(a): Laboratory analysis

Where laboratory analysis verifies or validates a parameter critical to food safety, use a competent laboratory, internal or external, that works to the applicable requirements of ISO/IEC 17025. The laboratory does not have to be accredited.

FSSC 2.5.15: Equipment management

Keep a documented purchase specification that covers hygienic design, legal and customer requirements and intended use, and a risk-based change management process with evidence of commissioning. This applies to all food chain categories except FII.

FSSC 22000 Version 7: what changes for calibration

The Foundation FSSC published FSSC 22000 Version 7.0 in May 2026. Audits against Version 6 may be delivered up to April 30, 2027, and upgrade audits to Version 7 run from May 1, 2027 to April 30, 2028.

ISO 22000:2018 stays the base standard, and Version 7 brings in the 2025 ISO 22002-x series of prerequisite programs. The calibration program wording in additional requirement 2.5.9(b) reads the same in Version 7 as in Version 6, and the laboratory analysis rule in 2.5.1(a) carries over.

For a calibration program, the practical step is to confirm that your equipment register and calibration schedule still cover the equipment named in your quality and quantity control procedures before your upgrade audit.

How Axiospec helps FSSC 22000 teams

Due dates you can see coming

Set a calibration interval per thermometer, scale, pH meter, or detector and let Axiospec surface what is due and overdue, with reminders before each date. Axiospec does not lock out or prevent use of any instrument.

Calibration status on every device

Each instrument carries a live status (in tolerance, due, overdue, or quarantined) so staff can confirm a device is fit for use before relying on its reading.

Retained records for the audit

Every calibration is logged with who, when, the readings, and the reference standard used, ready to export as an audit pack.

Capture readings anywhere, even offline

Log calibrations from any web browser or from the mobile app while offline on the line, then sync, so device records stay current without a trip back to a desk.

Calibration software for FSSC 22000 programs

FSSC 22000 leaves the tool to you. Additional requirement 2.5.9(b) asks for a program that calibrates and verifies the equipment used for quality and quantity control, and ISO 22000 clause 8.7 covers the control of monitoring and measuring. For a food manufacturer the practical question is which system keeps thermometers, scales, pH meters and metal detectors on schedule with records an auditor can follow.

Axiospec gives each device an interval and a live status: in tolerance, due, overdue, or quarantined. Calibrations are logged with who, when, the readings and the reference standard, then written to a tamper-evident ledger that you can export as an audit pack. A Due Calendar shows what is due and overdue, with reminders before each date. An accepted Fail or Damaged quarantines the instrument and the record asks for the impact to be written. Technicians can log from the iOS and Android apps, offline on the line, and then sync.

Axiospec does not replace your hazard control plan, your monitoring logs or your laboratory's analysis, and it records calibrations rather than checks between them. The free plan covers up to 50 active instruments, and we load existing records at no charge on every plan. Axiospec keeps the records; certification is decided by your certification body.

FSSC 22000 calibration: common questions

Does FSSC 22000 require calibration?

Yes. FSSC additional requirement 2.5.9(b) calls for a program to calibrate and verify equipment used for quality and quantity control, and ISO 22000:2018 clause 8.7 covers the control of monitoring and measuring. FSSC states that the calibration program has to meet clause 8.7.
What equipment does FSSC 22000 expect to be calibrated?

FSSC's interpretation of additional requirement 2.5.9 gives examples such as measuring scales, pH meters, refractometers, consistometers, viscosity meters, vernier calipers, online level inspectors and graduated cylinders. Equipment that monitors a critical control point or an operational prerequisite program falls under the hazard control plan in ISO 22000 clause 8.5.4.
What changes for calibration in FSSC 22000 Version 7?

The calibration program wording in additional requirement 2.5.9(b) reads the same in Version 7 as in Version 6. Version 7 was published in May 2026 and brings in the 2025 ISO 22002-x prerequisite programs, and upgrade audits run from May 1, 2027 to April 30, 2028.
Does a laboratory doing FSSC 22000 testing need ISO/IEC 17025 accreditation?

Not necessarily. FSSC's interpretation of additional requirement 2.5.1(a) says the laboratory does not have to be accredited but must work to the applicable requirements of ISO/IEC 17025 when it analyzes parameters critical to food safety. A laboratory accredited for the specific test methods meets the requirement.
Can Axiospec hold FSSC 22000 calibration records?

Yes. Axiospec records each calibration with the readings, the reference standard and who did the work in a tamper-evident ledger, and exports an audit pack. It does not replace your hazard control plan or your monitoring logs, and certification is decided by your certification body.
Can a small food plant use Axiospec?

Yes. The free plan covers up to 50 active instruments with unlimited users, and a new workspace starts with 45 days on Professional for up to 1,500 active instruments. We load existing records for you at no charge on every plan.
Does Axiospec force technicians to fill in every required field?

Yes, by default. When you select a standard, the fields that standard requires are marked on the calibration form and the save is blocked until they are filled. Enforcement is on for every workspace unless an admin turns it off in Settings. There is one deliberate exception. A brand new workspace is not held to the standard fields until it has logged its first calibration, so a first run is never trapped behind a form it cannot save. Full strictness applies from the second calibration onward. The public REST API enforces the same requirements on write.

Axiospec is a documentation and workflow tool. It helps you produce clean, traceable records that support FSSC 22000 compliance; certification depends on your own processes, scope, and assessor.

See it on your own equipment

Create a free account and switch on FSSC 22000 fields in minutes. No credit card.

Got a gage list? Send it over and we load it for you, usually in a couple of business days. Free on every plan.

Create your account

Want a hand moving your data over? Talk to our team.