For automotive suppliers
Automotive calibration software for IATF 16949 gage management
In automotive manufacturing, every gauge in your control plan feeds a dimension a customer will hold you to, and IATF 16949 section 7.1.5 expects calibration and verification against traceable standards, measurement systems analysis on those gauges, and records that show the status of each one. When a gauge drifts, the question is not only what to recalibrate but which parts it measured. Axiospec gives automotive suppliers one system to keep measuring resources under control, capture the data behind every calibration and MSA study, and produce records a customer or IATF third-party auditor can follow from the instrument back to the reference standard.
Standards that apply in Automotive Manufacturing
Calibration challenges in Automotive Manufacturing
MSA the customer will ask to see
IATF 16949 clause 7.1.5.1.1 expects measurement systems analysis on the gauges in your control plan, and your customer sets the methods. When Gage R&R, bias, and linearity studies live in side spreadsheets, they drift out of sync with the calibration record and take time to pull together for a part submission or an audit.
Gauge evidence tied to PPAP and control plans
Part approval and PPAP submissions rest on the measurement evidence behind each characteristic. Every gauge in the control plan needs a current calibration status and a study to back it, and a gap in that record can hold up a submission or a run at rate.
Customer and IATF audits on short notice
OEM and Tier 1 customers audit your gauge records, and an IATF third-party assessor will too. The equipment questions come fast: what is due, what is out of tolerance, and where is the MSA behind it. Employee-owned and customer-owned equipment has to sit in the same system, which spreadsheets rarely capture.
Suspect product when a gauge fails calibration
Clause 7.1.5.2.1 expects you to assess and notify when a gauge found out of tolerance may have passed nonconforming product. Reconstructing which parts a drifted gauge measured from paper or a spreadsheet is slow and error-prone, exactly when you need to move fast.
Hundreds of gauges across cells and plants
A single plant can run hundreds of gauges across cells and lines, and a supplier often runs several plants. Intervals slip when they live in one person's spreadsheet, and rolling a clean compliance picture up across sites by hand is a job in itself.
How Axiospec helps Automotive Manufacturing teams
AIAG MSA and Gage R&R in the app
Run AIAG average-and-range Gage R&R on the gauges in your control plan, with %GRR and number of distinct categories, plus bias and linearity studies, and paste repeated readings straight from Excel into the study grid. Your measurement systems analysis lives with the calibration record instead of a side spreadsheet.
Due-date control across every gauge
Set calibration and verification intervals per asset and let the Due Calendar surface what is due, due soon, and overdue, so no gauge in your control plan slips its interval because someone forgot to check a spreadsheet.
Tamper-evident, attributable records
Every calibration is written to a hash-chained ledger with as-found and as-left readings, automatic pass/fail, timestamps, and bound e-signatures, with two-person maker and checker sign-off available, so the records IATF 16949 asks you to keep are attributable and protected from quiet edits.
Reference-standard traceability and reverse trace
Record the reference standard, its certificate, and the provider behind each calibration so the traceable chain is visible on the instrument. When a gauge is found out of tolerance, reverse-trace from it to the calibrations and product it touched to scope suspect product fast.
Audit readiness across every plant
The Audit-Readiness Scorecard gives you a live 0 to 100 score and shows which gaps to close before a customer or IATF audit, and compliance rolls up per site with a workspace-wide total, so a multi-plant supplier sees one picture.
Shop-floor logging and tool crib check-out
Log calibrations on the floor from the native iOS and Android apps with QR-code scanning, printable labels, and voice logging, and check gauges out to an operator with a due-back date and full chain of custody, including employee-owned and customer-owned equipment.
See Axiospec on real calibration data
Open a working calibration record and click through it. No signup, no credit card.
Automotive Manufacturing calibration software: common questions
What should I look for in IATF 16949 calibration software?
IATF 16949 names no specific tool, so the question is which system keeps your data traceable and audit-ready. Section 7.1.5 requires that measuring equipment supporting product conformity is calibrated or verified at defined intervals against traceable standards, carries a visible calibration status, and is backed by records with as-received and after-adjustment readings, and clause 7.1.5.1.1 requires measurement systems analysis on the gauges in your control plan. Look for interval control, attributable records, reference-standard traceability, and MSA in one place. Axiospec covers each of these, but it does not certify your conformance, which your certification body decides.
Does Axiospec handle IATF 16949 MSA and Gage R&R?
Yes. You can run AIAG average-and-range Gage R&R with %GRR and number of distinct categories, plus bias and linearity studies, and paste repeated readings straight from Excel. Per-instrument Metrology Insights add a reliability-based interval, test uncertainty ratio, and false-accept risk. The MSA lives with the calibration record, not a side spreadsheet. Axiospec keeps the analysis and records; it does not decide your conformance.
Can I import our gage list from GAGEpack or GAGEtrak?
Yes. You can import your existing registry yourself from CSV, Excel, GAGEpack, or GAGEtrak, and the team offers a free white-glove migration if you would rather hand it over. Automotive gage management usually starts with years of existing records, so you move them in before your first calibration in Axiospec.
Is there a free way to try Axiospec for automotive?
Yes. The live demo opens a working calibration record with no signup and no credit card, so you can review the IATF 16949 fields, MSA, and traceability first. The 14-day free trial takes no card and lets you load your own plant data, and the Free plan runs a full program up to 50 active assets with unlimited users and no per-seat fee.
Axiospec is a documentation and workflow tool. It helps Automotive Manufacturing teams produce clean, traceable, audit-ready calibration records; certification and conformance depend on your own processes, scope, and assessor.
Audit-ready from day one
Unlimited users, self-serve import in an afternoon, and a tamper-evident record for every instrument.
Free plan, no credit card · Unlimited users · Nothing to install